TYPE M6000

main-M6000-industrial

Rugged sensor consisting of a machine screw that can be fastened into drilled and tapped holes.

Features

TYPE M6000

  • Extremely rugged sensor consisting of a hex head machine screw that can be fastened into drilled and tapped holes.
  • All thermistor types < 0.200” OD.
  • Hook-up wire or small diameter shielded / jacketed cable extension leads.
  • Maximum temp. ratings from 60°C up to 260°C.

m6000

TYPE M6500

  • Surface temperature sensor for locations where size and space are critical. Housing consists of a cylindrical body, milled wrench flats and a threaded section with an undercut to minor thread diameter for precise positioning of the sensor.
  • Small to medium thermistor types <0.100” OD.
  • Hook-up wire extension leads.
  • Maximum temp. ratings from 60°C up to 260°C.

cryo5

Specifications

TYPE M6000

  • Standard hex head screw material is stainless steel.
  • Aluminum, brass, titanium and a variety of plastics or other materials are available, consult factory.
  • Industry standard dimensions will apply for the following:
    • Coarse threads: from #4-40 to 1/2-12.
    • Fine threads: from #4-48 to 1/2-20.
    • Extra fine threads: from #12-32 to 1/2-28.
    • Metric threads: from M4x0.7 to M10x1.50.
    • “W” = wrench size for hex head.
    • “H” = thickness of hex head.
  • The following dimensions can be specified by the customer. Check with factory for availability.
    • “L” = length of screw under hex head.
    • “T” = length of threaded portion of housing.
    • “B” = overall body length.
  • Shoulder of screw may be undercut to minor diameter of the threads for o-ring installations.
  • Lead length “X” : 48 inches (typical).
  • Lead-wire gauge sizes from #22 to #32 AWG.

TYPE M6500

  • Standard housing material is stainless steel.
  • Aluminum or other materials are available, consult factory.
  • Industry standard dimensions will apply for the following:
    • Coarse threads: from #4-40 to 1/2-12.
    • Fine threads: from #4-48 to 1/2-20.
    • Extra fine threads: from #12-32 to 1/2-28.
    • Metric threads: from M4x0.7 to M10x1.50.
  • The following dimensions can be specified by the customer.
    • Check with factory for availability.
    • “L” = length of screw under flange / shoulder.
    • “T” = length of threaded portion.
    • “B” = overall body length.
    • “W” = wrench flat size.
    • “S” = thickness of flange / shoulder.
  • Lead length “X” : 48 inches (typical).
  • Lead-wire gauge sizes from #22 to #32 AWG.
 
Copyright © 2017 Amphenol Corporation. All Rights Reserved.